The details are as follows:

1. Packaging machinery should fix the product label on the obvious part, and write down the main technical parameters necessary for the normal operation of the machine or equipment, such as: rated current and voltage, rated pressure and thermal temperature.

2. The safety requirements of the hydraulic transmission system on packaging machinery should meet the requirements of GB3766, and the safety requirements of pneumatic systems should meet the requirements of GB7932.

3. The safety requirements of packaging machinery and electrical equipment should meet the relevant regulations of GB5226 standard.

4. Dangerous parts that can cause personal injury on packaging machinery must take corresponding safety measures. Relative moving parts, such as clamping, shearing and other moving parts must ensure a safe distance to prevent the operator from being pinched or cut. Transport devices that can cause danger should be placed in the body as much as possible. Exposed rotating, moving, or reciprocating parts that affect personal safety must be protected. Exposed positioning or protruding parts on moving parts must be smooth or protected.

5. Reliable anti-loosening measures must be taken for parts that may be loosened during machine operation.

6. When packaging machinery needs to discharge waste materials and smoke. Appropriate devices should be installed to avoid harm to the operator.

7. Packaging machinery only requires that when the motor rotates in one direction, the turning mark must be made on the motor or at an appropriate location.

8. When personnel enter the work area with great danger, safety protection devices should be set up in the work area. When the protective device isolates the entire working area of ​​the packaging machine, dangerous parts in the working area may not be provided with additional protective devices. The protective device of the work area shall be set to ensure a safe distance.

9. Packaging machinery that needs to be operated or installed from the ground shall be provided with a platform that meets the requirements of relevant standards, a ladder leading to the platform, and protective railings.

10. The packaging machinery working mechanism should have interlock protection to stop the machine or equipment from working when a failure occurs.

11. Packaging machinery should generally be equipped with a safety switch. In any emergency, pressing this switch can stop the machine to avoid accidents.

12. Before the machine or equipment enters the state of movement, it is necessary to remind all personnel to leave the dangerous area in time, and the packaging machine should be equipped with a warning device.

13. Packaging machinery should have clear and conspicuous signs of operation, lubrication, safety or warning. The safety colors and safety signs shall comply with the provisions of GB2893 and GB2894, and the graphic symbols in the signs shall comply with the relevant standards or regulations.

14. The safe operating mechanism of packaging machinery should be located in a position that is easy for the operator to operate and control.

15. Packaging machinery working in flammable and explosive environments shall have reliable protective measures for mechanical and electrical devices and comply with relevant standards or regulations.